Benefits at a glanceautomatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)all voltages can be monitored separately via telemetrycharging currents are adjustable, both for initial charging and for topping-up during operationrecharges automatically and immediately whenever neededcompanion App warns the pilot whenever the backup is usedthis unit ensures the everyday operation of your valuable modelsHardware featureswide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak marginCapacity 3 x 25 F, 20+ A peak currentshort circuit protectionfast charge (adjustable) up to 2.4 Acharging current is ramped up slowly, to protect main power supplydecoupled channels for power delivery and for chargingVLink Telemetry monitoring and controlno r/c channel (servo connector) must be sacrificed, pass-through via main connectoractive balancer between capacitors for low idle dischargeup to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion Apptelemetry input for other sensors or ESCs (daisy-chaining)Manual : https://www.mikado-heli.de/downloads/anleitungen/vbackup/VBar%20Control%20Power%20Backup%20Mini.pdfSpecificationsPower Supply3-12.6 V (3s LiPo), max. 16 VDimensionsapprox. 28 x 55 x 19 mm (H x W x D)Weightapprox. 33 g including wiresPower RatingCapacity 3 x 25 F, 20+ A peakContentsDeviceVBar Control Power Backup w/ power wire, manualConnecting WireTelemetry wire includedMiscellaneousMiscellaneousUpdate VBar NEO, install companion App on transmitter
